Follow the procedure to connect the card lamination module to the Evolis Primacy 2 card printer:
1. Install the printer and the lamination module on a flat surface.
2. Place the printer on the installation platform ("Printer" side)
3. Connect the printer power supply and USB cable.
4. Connect the lamination module power supply cable.
5. Place the lamination module on the installation platform ("Laminator" side)
6. Make sure that infra-red connectors are facing each other and the two modules are aligned
Once the printer and lamination module are connected, follow the instructions to power the machine on.
1. Plug the lamination module to an earthed power socket
2. Plug the printer to an earthed power socket
3. Connect the printer USB cable to the computer
The system is powered on: the Primacy Lamination control panel lights up showing that the machine is working properly.