Things you’ll need to setup connection.

  • Network type
  • SSID – case sensitive need to know if lower or upper case are being used?
  • Password


  1. On your Honeywell CN75 device go to Start
  2.  Click Settings 
  3. Click System 
  4. Click Enterprise Settings
  5. Click Communications   
  6. Click 802.11 Radio section to make sure Radio Enabled (ON)

  7. Click Radio Enabled to turn On/Off - Make sure it is turn ON - Radio Enabled (ON)

  8. Click on Funk Security to configure wireless connection

  9. Click Profile 1 to configure wireless settings



    • Unchecked Hide password text
    • Profile Name – Either leave or change name
    • Network Type – Infrastructure
    • ** SSID – Case Sensitive enter your SSID
    • ** Password Mode – Disabled(CAM)
    • 8021x – None
    • Association – WPA/WPA2 Mixed
    • Pre-Shared Key – Enter Password for wireless connection.
    • We can now create a bar code with Honeywell’s ScanNGo.  Then you can scan all other Honeywell CN75 and it will configure Wi-Fi settings for you.